Feature of Wallbox Charger Station with LCD Screen
1. The product complies with the Low Voltage Directive 2014/35/EU, IEC61851-1:2019
2.IP65, weatherproof; leakage protection; impact resistance
3. Charging status and working error are simply displayed by LED indicator light and LCD screen
4. Optional unction of current selection button,
5. 8A-48A free switching current
Card, WIFI, Bluetooth a variety of options to start charging

Function introduction of Type1 Wallbox EV Charger
1.Residual current detection (RCD)

2.Surge protector
In: 3kA, lmax:6kA
3.Leakage protection
When the leakage protection is started, it needs to be cut offff the power outage and restart.
4.Overcurrent protection
When the current exceeds the early warning value,the charging pile cuts offff the power output, restarts
automatically after 10 seconds, and does not recover automatically after 3 cycles until you cut of the
power and restart.
5.Overvoltage protection
The protection starts when the voltage exceeds 275V, and automatically recovers when the voltage
is restored and stabilized.
6.Undervoltage protection
Start the protection when the voltage is less than 100V, and restore automatically when the voltage
is restored and stabilized.
7.Overtemperature protection
Start the protection when the internal temperature of the EV charging station exceeds 85 °C.

Installation Procedure:
1. Please use a percussion drill to drill holes according to the cardboard positioning
2. Install expansion bolts(6*M6*60MM)
3. fix the Mounting backplane with self=tapping screws(6*M5*50mm)
4. Align the main unit with the buckle on the back panel and install it, and then use screw
to fix(4*M5*40)